Macintosh Eudora 5 Email Client Configuration Instructions
Compatible Operating Systems: Macintosh 8/9/X
Introduction
This will set up your computer to access your Integra Telecom email using Eudora 5. These instructions will walk you through each step of the configuration to help the process move smoothly. It is recommended that these instructions be printed out and set aside for future reference.
Setting up
Close all open windows and running programs.
- Open Eudora.
- Click Special from the menu bar and select Settings.
- Under the "Getting Started" Category, fill out the fields to the right with the following:
Checking Mail
Username: Enter in your user name. (i.e. address.integra.net)
Mail Server: Enter "pop.integra.net" (without quotes).
Sending Mail
Real Name: Type a name that will display to people you send email to.
SMTP Server: Enter "smtp.integra.net" (without quotes).
Return Address: Type in your email address. (i.e. address@integra.net)
Click OK to begin working with Eudora.
Conclusion
Now that the information has been entered into Eudora 5, you should be able to send and receive email without error. If you would like to add another email address to use the same Inbox, just start at the beginning and work through the steps.
Configure POP Email Request Interval
- Click on the Special menu and choose Settings.
- On the left side, click on "Checking Mail."
- Make sure "Check for mail every" is set no lower than 5 minutes.
- Click OK.
If you require further assistance, please contact Integra ISP Support.
